Products
-
Vendor: Paneloc CorporationIs it a latch or is it a hinge? Maybe it's BOTH! These tiny latches/hinges are versatile and easy to use. Overall length of 1 3/8", all Stainless Steel. Mounting hardware not included.
- $3.22
- $3.22
- Unit price
- per
-
Vendor: Micro Plastics8" long, 0.126" wide, natural white cable ties are excellent for bundling small cables, wires, and much more. Need to tie your tomato plants to a stake to make them stand tall? Need to tidy up cables on your workstation to keep it neat...
- $1.99
- $1.99
- Unit price
- per
-
Vendor: Yardley ProductsYardley ZAP-SERT Double Ended Inserts offer plastic molders and users impressive benefits in lower cost production and better quality assemblies. These inserts give the strength of molded-in inserts and the economy of inserts that are put in after molding. For ease of installation, ZAP-SERT...
- $0.49
- $0.49
- Unit price
- per
-
Vendor: SouthcoThe 81 Series ejector spring is designed for use with Southco's Dzus Quarter-Turn fasteners (with part numbers that begin with "81"). These are used to pop the stud to the fully extended position when not latched, so it's clear to see when the stud...
- $2.99
- $2.99
- Unit price
- per
-
Vendor: SouthcoThis nylon "cup-style" washer is designed for use with Southco's 81 series Dzus quarter-turn fasteners. It fits neatly under the head of the stud and prevents scuffing or scratching on the panel. Available in black! Also, black. Sold in packagesof 100.
- $2.99
- $2.99
- Unit price
- per
-
Vendor: SouthcoSouthco's DZUS quarter-turn fasteners have been around for almost 100 years. They're strong, easy to install, and resist vibration. This is only part of the quarter-turn system, though! A complete system requires a Stud, Receptacle and Retainer, so unless you're replacing one component, please...
- $2.14
- $2.14
- Unit price
- per
-
Vendor: SouthcoSouthco's DZUS quarter-turn fasteners have been around for almost 100 years. They're strong, easy to install, and resist vibration. This is only part of the quarter-turn system, though! A complete system requires a Stud, Receptacle and Retainer, so unless you're replacing one component, please...
- $1.47
- $1.47
- Unit price
- per
-
Vendor: SouthcoOne of Southco's longest running products, the Lion quarter-turn stud is easy to use, easy to install, and requires no adjustment. It does, however, require some precise calculation, the right receptacle and a retainer. If you're not sure which partnumber(s)you need to make a...
- $8.99
- $8.99
- Unit price
- per
-
Vendor: SouthcoSouthco's DZUS quarter-turn fasteners have been around for almost 100 years. They're strong, easy to install, and resist vibration. This is only part of the quarter-turn system, though! A complete system requires a Stud, Receptacle, and Retainer, so unless you're replacing one component, please...
- $36.90
- $36.90
- Unit price
- per
-
Vendor: SouthcoThese stainless retainers are designed for use with Southco's 85 series Dzus quarter-turn fasteners. To install, just push them onto the stud to captivate the stud in your door panel. While these are very inexpensive, they add a lot of benefits to your quarter-turn...
- $22.00
- $22.00
- Unit price
- per
-
Vendor: Steeves AgenciesThis all-stainless-steel paddle latch is designed for use in rugged environments, and is built to last! They can be used indoors or out, and never require any adjustment. If you need access from the inside of the compartment or enclosure, there's a threaded hole...
- $16.25
- $16.25
- Unit price
- per
-
Vendor: SouthcoThese keepers are designed for use with Southco's 91 Series Vantage Down-Under latches. The latch hooks on to this keeper and holds your door closed. Keepers are not always required! If your application has a lip or edge on the lid that the latch...
- $0.68
- $0.68
- Unit price
- per
-
Vendor: SouthcoUnder-Center draw latches work using the same principle as "over-center" latches, just "upside down". This allows them to operate with a much smaller footprint, and with some other added benefits too. This one, for example, as a secondary catch that prevents accidental opening. Also,...
- $23.63
- $23.63
- Unit price
- per
-
Vendor: SouthcoThe 91 Series Vantage latches have a number of possible variations. Most notable in this version is that the latch base plate is concealed by the latch when it's closed. This provides increased tamper-resistance. Available in Zinc plated steel or Stainless steel, these latches...
- $23.63
- $23.63
- Unit price
- per
-
Vendor: AccurideWell-suited for large pantry pull-outs, vehicular storage, or other wider, heavier drawers. Extra heavy duty slide with lengths up to 60". Load Rating: up to 500 lbs. Full Extension .75 [19.1 mm] side space Non-disconnect Available in even lengths 10"-36", 40", 42", 44" 48",...
- $42.07
- $42.07
- Unit price
- per
-
Vendor: AccurideLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Load Rating: up to 500 lbs. Full Extension .75 [19.1 mm] side space Non-disconnect Clear zinc finish Check...
- $39.53
- $39.53
- Unit price
- per
-
Vendor: AccurideLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Load Rating: up to 500 lbs. Full Extension .75 [19.1 mm] side space Non-disconnect Clear zinc finish Check...
- $39.53
- $39.53
- Unit price
- per
-
Vendor: SouthcoSouthco's lift-off hinges are as pretty as they are functional. If you need to remove your door, just lift the door up off the pins! If you like the look of these hinges but don't want the lift-off feature, no problem! just install the...
- $24.43
- $24.43
- Unit price
- per
-
Vendor: SouthcoSouthco's 96 series lift off hinges are very strong for their compact size and resistant to things like water and most chemicals. These die-cast zinc hinges are powder coated to give them years of durable good looks. Using two (or more) of these hinges...
- $27.19
- $27.19
- Unit price
- per
-
Vendor: SouthcoIf you've ever tried to properly seal a gasketed door, you'll know how hard it is (impossible, actually) to adjust the compression on the hinged side of the door. What inevitably happens is that you tighten down the other side, crushing the seal beyond...
- $33.95
- $33.95
- Unit price
- per
-
Vendor: SouthcoNeed to do more than just open a door? Do you sometimes need to remove it completely? Southco's 96 series hinges can do that! These in-line mini lift-off hinges are just over an inch long when assembled, but can hold up to 280lbs each!...
- $22.40
- $22.40
- Unit price
- per
-
Vendor: SouthcoSouthco's 97 series draw latches are designed for applications that need to be strong and look great. Steel with a Zinc Plating and Bright chromate finish. Medium-Sized series, Heavy Duty construction. Need a keeper plate for this latch? Check out Part No. 97-57-102-11.
- $15.28
- $15.28
- Unit price
- per
-
Vendor: SouthcoSouthco's 97 series draw latches are strong, but are also designed for smooth function and appearance. Made of steel, and bright zinc plated for corrosion protection. Keepers are sold separately.
- $15.28
- $15.28
- Unit price
- per
-
Vendor: SouthcoThe photo of this latch simply doesn't do it justice. This MONSTER draw latch is large in every way. We included the specs for this one because the picture doesn't give you the proper sense of scale. The blade on this latch is over...
- $46.47
- $46.47
- Unit price
- per
-
Vendor: SouthcoThis handsome draw latch is a strong as it is good looking. With hundreds of pounds of holding force, this gorgeous piece of engineering looks like it belongs on a box that would hold only the finest of things. Keeper plates are sold separately,...
- $24.25
- $24.25
- Unit price
- per
-
Vendor: SouthcoThis keeper is designed to work with any Southco 97 series draw latch with part number starting with 97-50-. Made of 304 stainless steel, these keepers are strong and corrosion resistant. Mounting hardware not included.
- $2.19
- $2.19
- Unit price
- per
-
Vendor: SouthcoThis simple little draw latch packs a huge amount of strength! Easy to install and even simpler to operate, this stainless steel latch (made of 304 stainless) is made for the great outdoors. Mounting hardware and keeper are sold separately. Works with keeper part...
- $24.25
- $24.25
- Unit price
- per
-
Vendor: SouthcoCompression Latch, Over-Center Lever Latch, No Restriction, Non-locking, 10-32 Tapped Mounting Holes, Zinc Alloy, Chrome Plated, Bright Combining strength, ease of installation, and simplicity of operation, these heavy-duty lever-action latches provide door-closing leverage for heavier gasketed door applications. The single-motion opening action of latch...
- $174.00
- $174.00
- Unit price
- per
-
Vendor: SouthcoCompression Latch, Over-Center Lever Latch, No Restriction, Non-locking, 10-32 Tapped Mounting Holes, Zinc Alloy, Powder Coat, Silver Combining strength, ease of installation, and simplicity of operation, these heavy-duty lever-action latches provide door-closing leverage for heavier gasketed door applications. The single-motion opening action of latch...
- $174.00
- $174.00
- Unit price
- per
-
Vendor: SouthcoCompression Latch, Over-Center Lever Latch, Key Locking, 10-32 Tapped Mounting Holes, Zinc Alloy, Powder Coat, Black Combining strength, ease of installation, and simplicity of operation, these heavy-duty lever-action latches provide door-closing leverage for heavier gasketed door applications. The single-motion opening action of latch applies...
- $184.75
- $184.75
- Unit price
- per